Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with Plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics |
 English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with Plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with Plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards Plastics |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 12009.5-2016 |
(Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 |
China National Standards Plastics |
English PDF |
| GB/T 38288-2019 |
Plastics—Recycled polypropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards Plastics |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards Plastics |
English PDF |
| GB/T 37188.3-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties 塑料 可比多点数据的获得和表示 第3部分：环境对性能的影响 |
China National Standards Plastics |
English PDF |
| GB/T 37188.1-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties 塑料 可比多点数据的获得和表示 第1部分：机械性能 |
China National Standards Plastics |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with Plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with Plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with Plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with Plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with Plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with Plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 38008-2019 |
Gate valves of thermoPlastics materials 热塑性塑料闸阀 |
China National Standards Plastics |
English PDF |
| GB/T 37890-2019 |
Rubber-or Plastics-coated fabrics—Test method for wicking of the cloth 橡胶或塑料涂覆织物 芯吸性能测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 37889-2019 |
Rubber-or Plastics-coated fabrics—Test method for liquid contamination 橡胶或塑料涂覆织物 致液体污染性测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 37881-2019 |
Plastics－Long glass fiber reinforced polypropylene（PP） compound for automotive 塑料 汽车用长玻璃纤维增强聚丙烯(PP)专用料 |
China National Standards Plastics |
English PDF |
| GB/T 37862-2019 |
Plastics pipes used for pipeline rehabilitation—General 非开挖修复用塑料管道 总则 |
China National Standards Plastics |
English PDF |
| GB/T 37842-2019 |
Ball valves of thermoPlastics materials 热塑性塑料球阀 |
China National Standards Plastics |
English PDF |
| GB/T 37821-2019 |
Technical specifications for recycling of waste Plastics 废塑料再生利用技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 37547-2019 |
Classification and code of waste Plastics 废塑料分类及代码 |
China National Standards Plastics |
English PDF |
| GB/T 9576-2019 |
Rubber and Plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards Plastics |
English PDF |
| GB/T 37589-2019 |
Technical specification for anticorrosion of steel pipe and fitting lining with fluoroPlastics 钢制管道及管件内衬氟塑料耐蚀作业技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 37427-2019 |
Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for automobile 塑料 汽车用丙烯腈-丁二烯-苯乙烯(ABS)专用料 |
China National Standards Plastics |
English PDF |
| GB/T 37426-2019 |
Plastics—Test specimens 塑料 试样 |
China National Standards Plastics |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards Plastics |
English PDF |
| GB/T 1634.2-2019 |
Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 |
China National Standards Plastics |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 37662.2-2019 |
：Electrical equipment and system of industrial machines—Terminology—Part 2：Plastics machinery 工业机械电气设备及系统 术语 第2部分：塑料机械 |
China National Standards Plastics |
English PDF |
| GB/T 24113.2-2019 |
Electrical equipment of machines—Computer control systems for Plastics machinery—Part 2：Test and evaluation method 机械电气设备 塑料机械计算机控制系统 第2部分：试验与评价方法 |
China National Standards Plastics |
English PDF |
| GB/T 34691.1-2018 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-热塑性聚酯（TP）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 2918-2018 |
Plastics—Standard atmospheres for conditioning and testing 塑料-试样状态调节和试验的标准环境 |
China National Standards Plastics |
English PDF |
| GB/T 37188.2-2018 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 2:Thermal and processing properties 塑料-可比多点数据的获得和表示-第2部分:热性能和加工性能 |
China National Standards Plastics |
English PDF |
| GB/T 37196-2018 |
Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 37194.1-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-聚苯硫醚(PPS)模塑和挤出材料-第1部分:命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 37189-2018 |
Soft melamine foamed Plastics material 软质三聚氰胺泡沫塑料材料 |
China National Standards Plastics |
English PDF |
| GB/T 37263-2018 |
Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-Plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 |
China National Standards Plastics |
English PDF |
| GB/T 1040.1-2018 |
Plastics—Determination of tensile properties—Part 1:General principles 塑料-拉伸性能的测定-第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 2408-2008/XG1-2018 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 |
China National Standards Plastics |
English PDF |
| GB/T 24128-2018 |
Plastics—Assessment of the effectiveness of fungistatic compounds in plastics formulations 塑料-塑料防霉剂的防霉效果评估 |
China National Standards Plastics |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 36374.1-2018 |
Plastics-Sulfone polymer moulding and extrusion materials—Part1:Designation system and basis for specifications 塑料 砜聚合物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 36532-2018 |
Fibre-reinforced Plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards Plastics |
English PDF |
| GB/T 36790-2018 |
Plastics—Polyamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards Plastics |
English PDF |
| GB/T 36793-2018 |
Determination of platicizers in rubber-Plastics—Gas chromatography-mass spectrometry method 橡塑材料中增塑剂含量的测定 气相色谱质谱联用法 |
China National Standards Plastics |
English PDF |
| GB/T 36702.1-2018 |
Irrigation equipment—Safety devices for chemigation—Part 1: Small Plastics valves for chemigation 灌溉设备 化学灌溉用安全装置 第1部分：化学灌溉用小型塑料阀 |
China National Standards Plastics |
English PDF |
| GB/T 36805.1-2018 |
Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method 塑料 高应变速率下的拉伸性能测定 第1部分：方程拟合法 |
China National Standards Plastics |
English PDF |
| GB/T 36800.1-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 1:General principles 塑料 热机械分析法(TMA) 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 36800.2-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料 热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定 |
China National Standards Plastics |
English PDF |
| GB/T 36587-2018 |
Rubber and Plastics machinery—Terminology 橡胶塑料机械 术语 |
China National Standards Plastics |
English PDF |
| GB/T 35974.2-2018 |
Plastics and plastic lining pressure vessels—Part 2: Material 塑料及其衬里制压力容器 第2部分：材料 |
China National Standards Plastics |
English PDF |
| GB/T 35974.3-2018 |
Plastics and plastic lining pressure vessels—Part 3:Design 塑料及其衬里制压力容器 第3部分：设计 |
China National Standards Plastics |
English PDF |
| GB/T 35974.1-2018 |
Plastics and plastic lining pressure vessels—Part 1: General requirements 塑料及其衬里制压力容器 第1部分：通用要求 |
China National Standards Plastics |
English PDF |
| GB/T 35974.5-2018 |
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分：塑料衬里制压力容器的制造、检查与检验 |
China National Standards Plastics |
English PDF |
| GB/T 35974.4-2018 |
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels 塑料及其衬里制压力容器 第4部分：塑料制压力容器的制造、检查与检验 |
China National Standards Plastics |
English PDF |
| GB/T 6111-2018 |
ThermoPlastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统 耐内压性能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 3682.2-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards Plastics |
English PDF |
| GB/T 3682.1-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法 |
China National Standards Plastics |
English PDF |
| GB/T 20027.2-2017 |
Rubber-or Plastics-coated fabrics—Determination of bursting strength—Part 2: Hydraulic method 橡胶或塑料涂覆织物 破裂强度的测定 第2部分：液压法 |
China National Standards Plastics |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 24149.2-2017 |
Plastics―Polypropylene(PP) compound for automobile―Part 2: Instrument panel 塑料 汽车用聚丙烯（PP）专用料 第2部分：仪表板 |
China National Standards Plastics |
English PDF |
| GB/T 24149.3-2017 |
Plastics―Polypropylene(PP) compound for automobile―Part 3: Door panel 塑料 汽车用聚丙烯（PP）专用料 第3部分：门内板 |
China National Standards Plastics |
English PDF |
| GB/T 34329-2017 |
General requirements of fiber reinforced Plastics pressure vessel 纤维增强塑料压力容器通用要求 |
China National Standards Plastics |
English PDF |
| GB/T 34437-2017 |
Test method of the oxygen permeability of the multilayer composite Plastics pipe 多层复合塑料管材氧气渗透性能测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 3854-2017 |
Test method for hardness of reinforced Plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 5565.2-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 9574-2017 |
Rubber and Plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards Plastics |
English PDF |
| GB/T 5565.3-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 5565.1-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards Plastics |
English PDF |
| GB/T 12784-2017 |
Pressurized kneader for rubber and Plastics 橡胶塑料加压式捏炼机 |
China National Standards Plastics |
English PDF |
| GB/T 3857-2017 |
Test method for chemical resistance of glass fiber reinforced thermosetting Plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards Plastics |
English PDF |
| GB/T 33488.1-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 33488.3-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 |
China National Standards Plastics |
English PDF |
| GB/T 33488.2-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 |
China National Standards Plastics |
English PDF |
| GB/T 12000-2017 |
Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist 塑料 暴露于湿热、水喷雾和盐雾中影响的测定 |
China National Standards Plastics |
English PDF |
| GB/T 17603-2017 |
Standard practice for outdoor exposure testing of photodegradable Plastics 光解性塑料户外暴露试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 34903.1-2017 |
Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:ThermoPlastics 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料 |
China National Standards Plastics |
English PDF |
| GB/T 35382-2017 |
Test methods for energy consumption of blow moulding machines for Plastics 塑料中空成型机能耗检测方法 |
China National Standards Plastics |
English PDF |
| GB/T 35513.1-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚碳酸酯(PC)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB 16487.12-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of Plastics 进口可用作原料的固体废物环境保护控制标准—废塑料 |
China National Standards Plastics |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards Plastics |
English PDF |
| GB/T 34705-2017 |
Rubber-or Plastics-coated fabrics—Determination of oil permeability resistance—Cup method 橡胶或塑料涂覆织物 油扩散性能的测定 杯法 |
China National Standards Plastics |
English PDF |
| GB/T 33580-2017 |
Testing and measuring methods of energy consumption for rubber and Plastics extruder 橡胶塑料挤出机能耗检测方法 |
China National Standards Plastics |
English PDF |
| GB/T 33388-2016 |
Plastics—Determination of phenolic resin compositions—Liquid chromatography 塑料 酚醛树脂组分的测定 液相色谱法 |
China National Standards Plastics |
English PDF |
| GB/T 33323-2016 |
Plastics—Liquid phenolic resins—Determinaiton of water miscibility 塑料 液体酚醛树脂 水溶性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 33319-2016 |
Plastics—polyethylene compounds for breathable film 塑料 聚乙烯（PE）透气膜专用料 |
China National Standards Plastics |
English PDF |
| GB/T 3960-2016 |
Plastics—Test method for friction and wear by sliding 塑料 滑动摩擦磨损试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 33316-2016 |
Plastics—Phenolic resins—Determination of reactivity on a B-transformation test plate 塑料 酚醛树脂 在乙阶转变试板上反应活性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 33315-2016 |
Plastics—Phenolic resins—Determinaiton of the gel time 塑料 酚醛树脂 凝胶时间的测定 |
China National Standards Plastics |
English PDF |
| GB/T 33317-2016 |
Plastics—Phenolic resins—Determination of hexamethylenetetramine content—Kjeldahl method,perchloric acid method and hydrochloric acid method 塑料 酚醛树脂 六次甲基四胺含量的测定 凯氏定氮法、高氯酸法和盐酸法 |
China National Standards Plastics |
English PDF |
| GB 31604.27-2016 |
National Food Safety Standard-Food contact materials and products-Plastics - Determination of ethylene oxide and propylene oxide 食品安全国家标准 食品接触材料及制品 塑料中环氧乙烷和环氧丙烷的测定 |
China National Standards Plastics |
English PDF |
| GB/T 33098-2016 |
Rubber-or Plastics-coated fabrics—Determination of seam dead load shear resistance 橡胶或塑料涂覆织物 接缝耐静载剪切性能测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 19466.4-2016 |
Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity 塑料 差示扫描量热法（DSC） 第4部分：比热容的测定 |
China National Standards Plastics |
English PDF |
| GB/T 33094-2016 |
Plastics—Antistatic impact-resistant polystyrene compound 塑料 抗冲击聚苯乙烯防静电材料 |
China National Standards Plastics |
English PDF |
| GB/T 33047.1-2016 |
Plastics—Thermogravimetry (TG) of polymers—Part 1: General principles 塑料 聚合物热重法（TG） 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 1845.1-2016 |
Plastics—Polyethylene(PE) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚乙烯（PE）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 33061.1-2016 |
Plastics—Determination of dynamic mechanical properties—Part 1: General principles 塑料 动态力学性能的测定 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 30924.1-2016 |
Plastics—Ethylene-vinyl acetate(EVAC) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 乙烯-乙酸乙烯酯（EVAC）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 20027.1-2016 |
Rubber-or Plastics-coated fabrics—Determination of bursting strength—Part 1: Steel-ball method 橡胶或塑料涂覆织物 破裂强度的测定 第1部分：钢球法 |
China National Standards Plastics |
English PDF |
| GB/T 33061.10-2016 |
Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer 塑料 动态力学性能的测定 第10部分：使用平行平板振荡流变仪测定复数剪切黏度 |
China National Standards Plastics |
English PDF |
| GB/T 21238-2016 |
Glass fiber reinforced Plastics mortar pipes 玻璃纤维增强塑料夹砂管 |
China National Standards Plastics |
English PDF |
| GB/T 5474-2016 |
Plastics—Phenol formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method 塑料 酚醛模塑制品 游离氨和铵化合物的测定 比色法 |
China National Standards Plastics |
English PDF |
| GB/T 32697-2016 |
Plastics—Phenol-formaldehyde—Determination of electrical conductivity of resin extracts 塑料 酚醛树脂 萃取液电导率的测定 |
China National Standards Plastics |
English PDF |
| GB/T 5473-2016 |
Plastics—Phenol formaldehyde mouldings—Detection of free ammonia 塑料 酚醛模塑制品 游离氨的测定 |
China National Standards Plastics |
English PDF |
| GB/T 7130-2016 |
Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—lodometric method 塑料 酚醛模塑制品 游离酚的测定 碘量法 |
China National Standards Plastics |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards Plastics |
English PDF |
| GB/T 32681-2016 |
Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度 |
China National Standards Plastics |
English PDF |
| GB/T 32675-2016 |
Plastics—Phenloic resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料 酚醛树脂 液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32683.1-2016 |
Plastics—Determination of viscosity using a falling-ball viscometer—Part 1: Inclined-tube method 塑料 用落球黏度计测定黏度 第1部分：斜管法 |
China National Standards Plastics |
English PDF |
| GB/T 22271.3-2016 |
Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 3: Requirements for general materials 塑料 聚甲醛（POM）模塑和挤塑材料 第3部分：通用产品要求 |
China National Standards Plastics |
English PDF |
| GB/T 32688-2016 |
Plastics—Phenloic resin powder—Determination of flow distance on a heated glass plate 塑料 酚醛树脂 在加热玻璃板上流动距离的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32477-2016 |
Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32471-2016 |
Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32469-2016 |
Plastics—Polyurethane raw materials—Toluene diisocyanates 塑料 聚氨酯原料 甲苯二异氰酸酯 |
China National Standards Plastics |
English PDF |
| GB/T 12009.5-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidity 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定 |
China National Standards Plastics |
English PDF |
| GB/T 12009.4-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate content 塑料 聚氨酯生产用芳香族异氰酸酯 第4部分：异氰酸根含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 12009.2-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 2: Determination of hydrolysable chlorine 塑料 聚氨酯生产用芳香族异氰酸酯 第2部分：水解氯的测定 |
China National Standards Plastics |
English PDF |
| GB 51160-2016 |
Technical code for fibre reinforced Plastics equipment and piping engineering 纤维增强塑料设备和管道工程技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 32364-2015 |
Plastics—Phenloic resins—Determination of pH 塑料 酚醛树脂 pH值的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32378-2015 |
Glass-reinforced thermosetting Plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32456-2015 |
General specifications for electromagnetic of induction heating energy-saving systems used for rubber and Plastics machines 橡胶塑料机械用电磁加热节能系统通用技术条件 |
China National Standards Plastics |
English PDF |
| GB/T 9647-2015 |
ThermoPlastics pipes—Determination of ring stiffness 热塑性塑料管材 环刚度的测定 |
China National Standards Plastics |
English PDF |
| GB/T 32457-2015 |
Conveyor belts—Specification for rubber-or Plastics-covered conveyor belts of textile construction for general use 输送带 具有橡胶或塑料覆盖层的普通用途织物芯输送带规范 |
China National Standards Plastics |
English PDF |
| GB/T 32434-2015 |
Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序 |
China National Standards Plastics |
English PDF |
| GB/T 20463-2015 |
Rubber- or Plastics-coated fabrics for water-resistant clothing—Specification 防水服用橡胶或塑料涂覆织物 规范 |
China National Standards Plastics |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 32363.1-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 聚酰胺模塑和挤出材料 第1部分：命名系统和规范基础 |
China National Standards Plastics |
English PDF |
| GB/T 14232.2-2015 |
Plastics collapsible containers for human blood and blood components—Part 2: Blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第2部分：用于标签和使用说明书的图形符号 |
China National Standards Plastics |
English PDF |
| GB/T 32163.2-2015 |
Specification for eco-design product assessment—Part 2：Degradable Plastics 生态设计产品评价规范 第2部分：可降解塑料 |
China National Standards Plastics |
English PDF |
| GB/T 32106-2015 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production 塑料 在水性培养液中最终厌氧生物分解能力的测定 通过测量生物气体产物的方法 |
China National Standards Plastics |
English PDF |
| GB/T 20219-2015 |
Rigid cellular Plastics-spray-applied polyurethane foam for thermal insulation 绝热用喷涂硬质聚氨酯泡沫塑料 |
China National Standards Plastics |
English PDF |
| GB/T 31403-2015 |
Plastics—Acrylonitrile-butadiene-styrene/poly (methyl methacrylate) alloy 塑料 丙烯腈-丁二烯-苯乙烯/聚甲基丙烯酸甲酯合金 |
China National Standards Plastics |
English PDF |
| GB/T 31402-2015 |
Plastics—Measurement of antibacterial activity on plastics surfaces 塑料 塑料表面抗菌性能试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 29165.4-2015 |
Petroleum and natural gas industries—Glass-reinforced Plastics(GRP) piping—Part 4: Fabrication, installation and operation 石油天然气工业 玻璃纤维增强塑料管 第4部分：装配、安装与运行 |
China National Standards Plastics |
English PDF |
| GB/T 29165.3-2015 |
Petroleum and natural gas industries—Glass-reinforced Plastics (GRP) piping—Part 3: System design 石油天然气工业 玻璃纤维增强塑料管 第3部分：系统设计 |
China National Standards Plastics |
English PDF |
| GB/T 31064-2014 |
Rubber-or Plastics-coated fabrics―Determination of puncture resistance 橡胶或塑料涂覆织物 抗刺穿性测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 31256-2014 |
Conveyor belts―Specification for rubber-or Plastics-covered conveyor belts of textile construction for underground mining 输送带 具有橡胶或塑料覆盖层的地下采矿用织物芯输送带规范 |
China National Standards Plastics |
English PDF |
| GB/T 31331-2014 |
Requirement and identification for environmental protection of modified Plastics 改性塑料的环保要求和标识 |
China National Standards Plastics |
English PDF |
| GB/T 30768-2014 |
Paper and Plastics laminated films and pouches for food packaging 食品包装用纸与塑料复合膜、袋 |
China National Standards Plastics |
English PDF |
| GB/T 30925-2014 |
Plastics―Ethylene-vinyl acetate copolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料 乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料 乙酸乙烯酯含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 30923-2014 |
Plastics―Polypropylene materials for meltblown 塑料 聚丙烯（PP）熔喷专用料 |
China National Standards Plastics |
English PDF |
| GB/T 24148.9-2014 |
Plastics—Unsaturated polyester resins (UP-R)—Part 9: Determination of overall volume shrinkage 塑料 不饱和聚酯树脂(UP-R） 第9部分：总体积收缩率测定 |
China National Standards Plastics |
English PDF |
| GB/T 24148.8-2014 |
Plastics—Unsaturated polyester resin—Part 8：Determination of color using platinum-cobalt colormetric method 塑料 不饱和聚酯树脂（UP-R） 第8部分：铂-钴比色法测定颜色 |
China National Standards Plastics |
English PDF |
| GB/T 24148.7-2014 |
Plastics—Unsaturated polyester resins—Part 7: Measurement of gel time at ambient temperature 塑料 不饱和聚酯树脂（UP-R） 第7部分: 室温条件下凝胶时间的测定 |
China National Standards Plastics |
English PDF |
| GB/T 16422.4-2014 |
Plastics―Methods of exposure to laboratory light sources―Part 4：Open-flame carbon-arc lamps 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards Plastics |
English PDF |
| GB/T 16422.3-2014 |
Plastics―Methods of exposure to laboratory light sources―Part 3: Fluorescent UV lamps 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Plastics |
English PDF |
| GB/T 16422.2-2014 |
Plastics―Methods of exposure to laboratory light sources―Part 2：Xenon-arc sources 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards Plastics |
English PDF |
| GB/T 30403-2013 |
Domestic Plastics bucket 日用塑料提桶 |
China National Standards Plastics |
English PDF |
| GB/T 30200-2013 |
Test method for energy consumption of rubber and Plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 |
China National Standards Plastics |
English PDF |
| GB/T 9572-2013 |
Rubber and Plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 5568-2013 |
Rubber or Plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards Plastics |
English PDF |
| GB/T 5567-2013 |
Rubber and Plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 5563-2013 |
Rubber and Plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 18422-2013 |
Rubber and Plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 30102-2013 |
Plastics―Guidelines for the recovery and recycling of plastics waste 塑料 塑料废弃物的回收和再循环指南 |
China National Standards Plastics |
English PDF |
| GB/T 30086-2013 |
Determination of axial coefficient of linear expansion of Plastics pipes for water supply 给水塑料管道轴向线膨胀系数试验方法 |
China National Standards Plastics |
English PDF |
| GB 29993-2013 |
Rubber and/or Plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 |
China National Standards Plastics |
English PDF |
| GB/T 27797.4-2013 |
Fibre-reinforced Plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 |
China National Standards Plastics |
English PDF |
| GB/T 3403.3-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 3: Requirements for selected moulding compounds 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第3部分: 选定模塑料的要求 |
China National Standards Plastics |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 29883-2013 |
Packaging for dangerous goods - Rigid Plastics intermediate bulk containers - Methods of exposure to laboratory light sources（fluorescence UV lamp） 危险品包装 刚性塑料中型散装容器 实验室光源（荧光紫外灯）暴露法 |
China National Standards Plastics |
English PDF |
| GB/T 29874-2013 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定 |
China National Standards Plastics |
English PDF |
| GB/T 13454.3-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第3部分：选定模塑料的要求 |
China National Standards Plastics |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 13454.1-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs) - Part 1: Designation system and basis for specifications 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 29645-2013 |
Plastics - Recycled polystyrene compound 塑料 聚苯乙烯再生改性专用料 |
China National Standards Plastics |
English PDF |
| GB/T 29640-2013 |
Plastics - Glass fiber reinforced poly(decamethylene terephthalamide) compound 塑料 玻璃纤维增强聚对苯二甲酰癸二胺 |
China National Standards Plastics |
English PDF |
| GB/T 29552-2013 |
Fibre reinforced Plastics composites bridge decks 纤维增强复合材料桥板 |
China National Standards Plastics |
English PDF |
| GB/T 9576-2013 |
Rubber and Plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards Plastics |
English PDF |
| GB/T 9575-2013 |
Rubber and Plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 |
China National Standards Plastics |
English PDF |
| GB/T 9573-2013 |
Rubber and Plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 |
China National Standards Plastics |
English PDF |
| GB/T 18423-2013 |
Rubber and Plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards Plastics |
English PDF |
| GB/T 29288-2012 |
General requirement for thermoformable rigid polyurethane cellular Plastics 热塑性硬质聚氨酯泡沫塑料通用技术条件 |
China National Standards Plastics |
English PDF |
| GB/T 29047-2012 |
Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-Plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards Plastics |
English PDF |
| GB/T 29165.2-2012 |
Petroleum and natural gas industries - Glass-reinforced Plastics (GRP) piping - Part 2: Qualification and manufacture 石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造 |
China National Standards Plastics |
English PDF |
| GB/T 29165.1-2012 |
Petroleum and natural gas industries - Glass-reinforced Plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials 石油天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、应用及材料 |
China National Standards Plastics |
English PDF |
| GB/T 28799.3-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯（PE-RT）管道系统 第3部分：管件 |
China National Standards Plastics |
English PDF |
| GB/T 28799.2-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 |
China National Standards Plastics |
English PDF |
| GB/T 28799.1-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 28605-2012 |
Rubber and Plastics tubing and hoses and hose assemblies for drinking water 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件 |
China National Standards Plastics |
English PDF |
| GB/T 19089-2012 |
Rubber-or Plastics-coated fabrics - Determination of abrasion resistance - Martindale method 橡胶或塑料涂覆织物 耐磨性的测定 马丁代尔法 |
China National Standards Plastics |
English PDF |
| GB/T 28494-2012 |
Globe valves of thermoPlastics materials 热塑性塑料截止阀 |
China National Standards Plastics |
English PDF |
| GB 25936.3-2012 |
Rubber and Plastics machines - Size reduction machines - Part 3: Safety requirements for shredders 橡胶塑料粉碎机械 第3部分：切碎机安全要求 |
China National Standards Plastics |
English PDF |
| GB 25936.2-2012 |
Rubber and Plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers 橡胶塑料粉碎机械 第2部分：拉条式切粒机安全要求 |
China National Standards Plastics |
English PDF |
| GB 25936.1-2012 |
Rubber and Plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators 橡胶塑料粉碎机械 第1部分：刀片式破碎机安全要求 |
China National Standards Plastics |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
